how to solve Canon MP287 with error code E08

This error appears with this message: “The Ink Absorber is Almost Full”
To solve this problem, you have to reset the waste ink counter.
Solution:

• Turn on the printer.
• The panel will display error E08, with message “The Ink Absorber is Almost Full”. 
• Download the Resetter for MP287 
• Printer must be in a state of Service Mode. 
• Turn off the E08 error by pressing the power button. 
• Do not unplug the power cord. 
• Press and Hold the button Stop/Reset followed by pressing the Power button. 
• Release the button Stop/Reset only.
• Press the button Stop/Reset 6 times, then release both buttons simultaneously.
• The printer MP287 will be in Service Mode. 
• LCD Panel will blank / dark and in your computer will detect new hardware. Ignore it. 
• Exctract and Run Service Tool for MP287 
• Click on “Play”, then the printer will proceed and will print one page with the words “D = 000.0″ 
• Click “Clear EEPROM”. Then click “EEPROM”, and the printer will print the results Resetter. Writing one line as follows: “TPage (COPY TTL = 00 000 = 00 000)”. 
• Turn off by pressing the power. 
• post your question here
      
• Call Canon Support +1-855-517-2433